Sigma Corporation is pleased to announce the launch of the new Sigma SD10 Digital SLR camera. This high-definition digital SLR camera is powered by Foveon X3 image sensor, which captures all RGB colors at each and every pixel.
FOVEON X3 Direct Image Sensor
Foveon X3 direct image sensor in the Sigma SD10 digital SLR can capture all RGB colors at each and every pixel. The revolutionary design of Foveon X3 direct image sensor features three layers of pixel sensors.
RAW Image Format
With the RAW data recording system of the SIGMA SD10, it is possible to obtain high picture definition and compact file size. The lossless compression system of RAW data, eliminates image deterioration, provides superior pictures, without sacrificing original image quality and retains full image capture details.
Three Resolution Settings
Depending on the intention of the photographer, the SIGMA SD10 allows photographers to select the resolution of RAW data images in one of three resolutions. HI mode (2268 x 1512 x 3 layers) delivers highest resolution image performance. MED mode (1512 x 1008 x 3 layers) has high definition and recording capacity. LOW mode (1134 x 756 x 3 layers) for capturing the most images per given memory capacity.
ISO100-1600 setting
In Default or normal mode the ISO sensitivity of SD10 can be set to 100, 200, 400 and 800. If Extended Mode is selected, it is possible to use ISO 1600 sensitivity. In any ISO sensitivity setting, it is possible to select a high shutter speed from 1/6000 sec. to a slow shutter speed of 30secs.
Image Sensor Dust Protector
Most digital SLR cameras are typically vulnerable to dust entering the body especially when the lens is dismounted for changing. Dust and dirt entering through the lens mount of a digital camera, can create serious defects in image quality. The dust protector of the SIGMA SD10 prevents dust from entering and adhering to the image sensor. Even if dust adheres to the dust protector it will not have an influence on image quality, because the dust protector is located away from the image sensor and is therefore out of focus.
Intuitive Interface
Clearly marked operation panel buttons make it easy for photographers to identify and use desired functions. Each button of the Sigma SD10 is devised and arranged to provide a functional and easy-to-use setting. The SD-10 is probably the most user-friendly digital SLR. It is always ready to shoot, even when reviewing earlier images.
Exposure Compensation and Auto Bracketing
It is possible to adjust exposure in 1/3 EV steps increments up to ±3 EV from the auto- exposure level set for the scene. In situations where it is difficult to determine proper exposure, the auto bracketing function allows a sequence of pictures to be taken of the same subject at three different exposure levels; Appropriate Exposure, Under Exposure and Over Exposure.
Non-stop shooting up to 30 frames
A high-speed CPU and high-volume buffer memory enable the SD10 to shoot at 2.5 frames per second for up to 30 consecutive frames in LOW mode, up to 14 consecutive frames in MED mode, and up to 6 frames in high-quality HI mode.
IEEE 1394 (FireWire) and USB Interfaces
The SIGMA SD10 can transmit the images from camera to computer with high-speed IEEE1394 (Firewire) and widely available USB interfaces. IEEE1394 (Firewire) interface delivers super-high-speed image data transmission rate.
Power Source
SD10 can be powered by two CR-V3 lithium batteries or four "AA" Ni-Mh batteries or four Nickel Zinc primary batteries or a dedicated AC adapter (included with the camera). Optional battery pack can hold four CR-V3 batteries or eight AA batteries more than enough power for most shoots.
Recording on CF cards and Microdrives
The Sigma SD10 records on reliable, high capacity Type I and Type II CF (CompactFlash) cards or a Microdrive to hold larger volumes of data.
1.8 in. type TFT Monitor
The SIGMA SD10 is equipped with a large 1.8 in. appr.130,000 dot low temperature polysilicon TFT-LCD monitor with white LED on the back panel, which displays images, menus and histogram. The coverage area of the LCD monitor is 100% of that seen from the viewfinder, so the composition can also be seen easily.
Product Description:
Foveon X3(R) direct image sensor in the Sigma SD10 digital SLR can capture all RGB colors at each and every pixel. The revolutionary design of Foveon X3(R) direct image sensor features three layers of pixel sensors Using three silicon-embedded layers of pixel sensors, stacked to take advantage of silicon's ability to absorb red, green, and blue light at different respective depths, the Foveon X3(R) direct image sensor can thereby directly capture full color and detail at each and every pixel location, without interpolation. With the RAW data recording system of the SIGMA SD10, it is possible to obtain high picture definition and compact file size. The lossless compression system of RAW data, eliminates image deterioration, provides superior pictures, without sacrificing original image quality and retains full image capture details. Depending on the intention of the photographer, the SIGMA SD10 allows photographers to select the resolution of RAW data images in one of three resolutions. HI mode (2268x1512x3 layers) delivers highest resolution image performance. MED mode (1512x1008x3 layers) has high definition and recording capacity. LOW mode (1134x756x3 layers) for capturing the most images per given memory capacity. The SD10 comes with SIGMA Photo Pro 2.0 software for modifying recorded RAW data image files. It is easy to make adjustments (white balance, exposure, color balance, and contrast for example) in three modes. The X3F mode stores the orig